Xecuter 2.6 CE (SOLDERLESS!)

[1InuYasha]

i have a version 1.0 or 1.1 XBox with the holes filled an so i was wondering how could my Xecuter 2.6 CE (SOLDERLESS!!) and the XAPTER SOLDERLESS ADAPTER work on my Xbox.do u just line it up on top of it?

 

i have alot more ?s,but i will get it all written down in 1 post.i'll do it later.Thanks every1.

[Prican25]

it will work fine either way, the pins are sharp to stay in place unlike earlier solderless from xecuter.

 

i recomend using a solder mod, as it isn't that hard to do (simple as a ps1 mod)

[1InuYasha]

some1 also said i can use the wire harness that comes with it?

what method is better?

how do u install the wire harness?

and is it hard?

[Inky]

check out www.teamxecuter.com and www.xbox-scene.com

 

good tuts over there on soldering in the xecuter chips. I just ordered a new xecuter2.6 too I am tired of my matrix coming out of alignment.

direct link to tutotials

http://www.teamxecuter.com/x3/tutorials/x3pin1015.htm

it says 3.0 but it's the same for 2.6

 

soldering guide

http://www.epemag.com/solderfaq/pictures.htm

 

bios flashing tut

http://www.teamxecuter.com/flashbios/

[Inky]

here is a good thread on the wire install on a 1.0 xbox over at xbox scene

http://forums.xbox-scene.com/index.php?sho....6+wire+install

 

here's another good tut

http://www.system-mods.com/guides/xecuter26/

with all that it should be pretty easy to get yourself up and running

[Alpha]

Go with the solderless, I soldered mine and it was a nightmare.

Let's say I don't even have an XBOX anymore.

[Inky]

my solderless matrix comes out of alignment all the time. it used to be fine but lately it is really becoming a pain in the butt. I was thinking of putting the xecuter in with an xapt3r but my screw hole is alittle blown out from reinstalling the matrix and using a bigger screw so I am gonna wire install when my new chip arrives.

[1InuYasha]

i place the chip in on top of the filled iron an it lit up blue but looks like the d0 point is also filled what 2 do about this?

and the mod-chip has 3 plug joints- one i connected to the switch and there r 2 more a white an a red-do anything go in theme.i filled the red an white joint 1 side of the wire but the next end has no connecter just a end cut wire.

[ken_cinder]

The real place to look is the Team Xecuter website, there are installation manuals there. And a forum just for the purpose of asking for/searching for help with their products.

[Alpha]

i place the chip in on top of the filled iron an it lit up blue but looks like the d0 point is also filled what 2 do about this?

and the mod-chip has 3 plug joints- one i connected to the switch and there r 2 more a white an a red-do anything go in theme.i filled the red an white joint 1 side of the wire but the next end has no connecter just a end cut wire.

 

Please do not make double topics concerning the same subject.

We have merged your new topic into your original. Thank you.

[1InuYasha]

oh-sorry