yorel Posted March 8, 2006 Share Posted March 8, 2006 Thanks. Link to comment Share on other sites More sharing options...
Yooz Urnaim Posted March 18, 2006 Share Posted March 18, 2006 How precise can timestamps be generated on the DS? I see that sgstair mentioned microsecond counters in his Hardware Reference page; are discrete microseconds (1 E-6 seconds) as precise as the DS can count? Or can it count fractions of microseconds as well? If so, how small of a fraction? 1/10 microseconds (1 E-7 seconds)? 1/100?... Link to comment Share on other sites More sharing options...
sgstair Posted March 18, 2006 Author Share Posted March 18, 2006 How precise can timestamps be generated on the DS? I see that sgstair mentioned microsecond counters in his Hardware Reference page; are discrete microseconds (1 E-6 seconds) as precise as the DS can count? Or can it count fractions of microseconds as well? If so, how small of a fraction? 1/10 microseconds (1 E-7 seconds)? 1/100?...<{POST_SNAPBACK}>Technically the DS timer system can operate at a maximum resolution of about 33MHz, I think. (which is 32 times more accurate than a microsecond timer) -Stephen Link to comment Share on other sites More sharing options...
Two9A Posted March 20, 2006 Share Posted March 20, 2006 Technically the DS timer system can operate at a maximum resolution of about 33MHz, I think.Of course, then your problem becomes how to service interrupts that happen every two clocks. Not sure you can do a great deal in that amount of time. Link to comment Share on other sites More sharing options...
sgstair Posted March 20, 2006 Author Share Posted March 20, 2006 Technically the DS timer system can operate at a maximum resolution of about 33MHz, I think.Of course, then your problem becomes how to service interrupts that happen every two clocks. Not sure you can do a great deal in that amount of time. <{POST_SNAPBACK}>blah, you don't need to service an interrupt every 2 clocks, just read whenever you like and you get a cycle accurate count. -Stephen Link to comment Share on other sites More sharing options...
Grey Posted May 16, 2006 Share Posted May 16, 2006 Is it possible at all to change the timeout value for things such as autoconnect or recv? I find that if those operations fail for any reasons, it takes a long time, (if ever) for them to come back (I've never actually waited that long). This essentially freezes up the DS if there's a failure. So... is there a way to change the timeout? Link to comment Share on other sites More sharing options...
sgstair Posted May 20, 2006 Author Share Posted May 20, 2006 Is it possible at all to change the timeout value for things such as autoconnect or recv? I find that if those operations fail for any reasons, it takes a long time, (if ever) for them to come back (I've never actually waited that long). This essentially freezes up the DS if there's a failure. So... is there a way to change the timeout?<{POST_SNAPBACK}>Well.... yes and no.Autoconnect does time out, but even so, you are in charge of the loop that waits until it's connected, so you are responsible for stopping it early if you want to.it is possible that recv() will never return in the current version of the lib, but work is being done to fix this - additionally you can switch to non-blocking mode and recv() will always return immediately. -Stephen Link to comment Share on other sites More sharing options...
BasiX Posted June 26, 2006 Share Posted June 26, 2006 Hi! I'm new on this forum and I have a question: Why can my DS not connect to my internet / router if I use my normal WFC-settings? When I play online games, such as Mario Kart DS, it works fine. But i can't connect with homebrew software... (My connection is WEP secured) PLEAS HELP Link to comment Share on other sites More sharing options...
sgstair Posted July 5, 2006 Author Share Posted July 5, 2006 BasiX: this is likely due to lack of shared key authentication support, or possibly because your AP is not broadcasting it's SSID - both of these issues are in the pipeline and will be resolved soon though! -Stephen Link to comment Share on other sites More sharing options...
regothealien Posted January 10, 2008 Share Posted January 10, 2008 very complicated all i know is to turn ur pc on then play a ds game that is wifi competable and off you go Link to comment Share on other sites More sharing options...
Recommended Posts