blue_eyed_surfer2003 Posted May 5, 2008 Share Posted May 5, 2008 I modded my xbox a long time ago with an xecuter mod chip. i recently tried turning it on and it keeps bringing me to a screen that says FLASHBIOS 3.0.1 on top. how do I get out of this and back to the screen where I can play the games that I downloaded onto it? Link to comment Share on other sites More sharing options...
fumanchu Posted May 5, 2008 Share Posted May 5, 2008 well its possible that you might have to flash a new bios on to your modchip.or instead of just pushing the on button or the eject button to turn on your xbox try presing both at the same time,i have heard this sometimes works. Link to comment Share on other sites More sharing options...
blue_eyed_surfer2003 Posted May 6, 2008 Author Share Posted May 6, 2008 nope. pressing the two buttons didn't work. what happens when i flash a new bios and how do i do it? Link to comment Share on other sites More sharing options...
lordpro Posted May 6, 2008 Share Posted May 6, 2008 (edited) nope. pressing the two buttons didn't work. what happens when i flash a new bios and how do i do it? just follow the steps to flash the bios in this tutorial bios flash tutorial Edited May 6, 2008 by lordpro Link to comment Share on other sites More sharing options...
fumanchu Posted May 6, 2008 Share Posted May 6, 2008 you could flash your modchip with slayers auto installer disc2.7,that come with all if not most of the different versions of bios.did your xbox work before?this will probably be a waste of time but try holding the back triggers and push select and start at the same time. Link to comment Share on other sites More sharing options...
stickman81 Posted May 7, 2008 Share Posted May 7, 2008 Depending on what version Xecuter you have, there might be a bank switch installed. I'm guessing you had this mod done elsewhere. If you have a switch, ensure you have the correct bank selected. FlashBIOS usually is on one bank, then the other bank has a bios like X4981 or Evox M8 etc... Link to comment Share on other sites More sharing options...
lordpro Posted May 7, 2008 Share Posted May 7, 2008 x3 3294 for v1.0 to v1.5 xboxsx3 3294 v16 plus v1.6 v1.6b xboxsdid you flash the right bioswhat xbox do you have if you got a version 1.0 to 1.6 try power/eject at sametime to get backup (flashbios3.0.1) then flash bios to on on off off offif you have a v1.6b change switch to off on off off off bootup flashbios 3.0.3 then change switch back to on on off off off then reflash with right bios Link to comment Share on other sites More sharing options...
stickman81 Posted May 7, 2008 Share Posted May 7, 2008 lordpro is correct - if you have an Xecuter 3 Modchip. If you have an older v2.x, then DO NOT use the 3294 Bios. X-4981 is a good one for v2.x chips. Link to comment Share on other sites More sharing options...
blue_eyed_surfer2003 Posted May 8, 2008 Author Share Posted May 8, 2008 oh my god. all i had to do was switch it to on on off off off. it was soooo simple. I still have everything that i downloaded onto it. thank you guys so much! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now