Gomess Posted February 8, 2010 Share Posted February 8, 2010 Hi folks, I better preface this debut post with an apology, 'cos I've seen that almost the exact same question has been asked before. But the answers to that question used terminology that I don't at all understand, and I didn't want to hijack a previous topic, so... Much like the other poster who was greeted by a neverending cycle of "crosshatch screen, coloured squares, sound test, set clock, crosshatch screen..." upon booting SvC Chaos, I'm unable to play Double Dragon for the exact same reason (except I'm on Windows, rather than a Mac). It recognises that the rom is there, I guess, and it's the only one of my many NG roms that doesn't work! So I'm pretty stumped. And like I said, I'm afraid I have no idea what "bios" or "kawaks" or "mame" are, but I'm willing to learn. Link to comment Share on other sites More sharing options...
The-Ice-Man Posted February 8, 2010 Share Posted February 8, 2010 What program are you using to run the game? Kawaks and MAME are just two of the programs that you can use to play NeoGeo roms. I use MAMEUI, which I've never had any problems running that game. Link to comment Share on other sites More sharing options...
Agozer Posted February 8, 2010 Share Posted February 8, 2010 Regarding SvC, the the problems you describe suggest that the romset you have is not the "right" romset for the emulator that you use. If you are using the NeoRAGEx emulator, you are most likely trying to run a romset of SvC that hasn't been properly stripped of its protection mechanisms and hacked to run on NRX. What exactly happens when Double Dragon refuses to boot? Link to comment Share on other sites More sharing options...
The-Ice-Man Posted February 8, 2010 Share Posted February 8, 2010 My MAMEUI wasn't up to date so I just updated it to see if there was an issue with Double Dragon in the new version or something, but confirmed that Double Dragon boots and runs fine on v1.36.2. Link to comment Share on other sites More sharing options...
Gomess Posted February 8, 2010 Author Share Posted February 8, 2010 I'm using NeoRAGEx, sorry should've mentioned that. It detects that the Double Dragon rom is there, but upon loading it just displays a grid pattern. Pressing Start causes it to change to a display of primary coloured squares. Pressing Start again causes it to change to what appears to be a sound test (I can highlight scrambled words, and hear character voices), again gives me a "clock set" screen (which instantly resets if I try to set it), and then back to the grid with another push of Start. It almost seems like I'm trapped in some sort of "debug" mode, you know what I mean? If the files I have are somehow wrong, well... Is it against forum rules to link directly to roms? :/ I'd just appreciate any help you guys can give, hope I answered your questions right. Feel free to bash me if I didn't. Link to comment Share on other sites More sharing options...
The-Ice-Man Posted February 8, 2010 Share Posted February 8, 2010 You know what, now that I think about it this is something that used to happen every so often to me in FBA-XXX Pro on the Xbox. You're stuck in the NeoGeo test mode. It would happen sometimes in FBA-XXX Pro if you reset using the control pad shortcuts. I think all you need to do is locate the dipswitch settings and disable the test mode. I don't use NeoRage so I can't tell you where to look, but once you find dipswitches and such, you should be able to work it out and get the game to load properly. The other option is to delete the game's nvram file, which should revert the game to default dip settings. Link to comment Share on other sites More sharing options...
Gomess Posted February 8, 2010 Author Share Posted February 8, 2010 Sorry, this is where the language barrier comes up. Dipswitch settings? NeoRAGEx has a menu called Machine Settings, under which are Language, System (Arcade / Console), MVS Settings, and Freeplay. Turning MVS Settings on before loading a game takes me to an arcade-owner-style debug menu where I can alter the game speed, difficulty, number of credits per quarter, and the like. Are those the dipswitches? :/ Yes, I am what is known as a noob. Otherwise, I opened up the game's folder, but couldn't find anything like an "nvram file". Is that a file ending in .nvram, or somesuch...? Cheers again folks, especially for your patience! Link to comment Share on other sites More sharing options...
The-Ice-Man Posted February 8, 2010 Share Posted February 8, 2010 (edited) Yes, the MVS Settings where you change the difficulty and so on are the dipswitches. They're called that coz in older arcade machines, the difficulty and so on had to be set by altering actual switches. Newer machines like NeoGeo and CPS2 used a software menu. The MVS machines had hard switches too I believe but that's not important. I'm gonna go and run Double Dragon myself with MAMEUI and see if I can remember how to get into the test screen on purpose, then I can hopefully tell you what you need to do to get out of it. If I fail at that then we'll try the nvram file. If NeoRage works anything like MAME in how it handles game memory you'll be looking for a file called doubledr.nv. Like I said I don't use NeoRage so if it's different I'm sorry, Agozer will have to help. He knows about every emulator in the world. Edit: Ok so getting into the test mode is easy. Getting out not so. Getting into it you just select Hardware Test on the Bios menu. But once you're in you're stuck there until you reset the game. Under normal circumstances reseting the game would make it boot like normal. Unless you had the hard dip set to Test on, in which case it would take you straight into the Bios. You're apparanlty being taken straight into the Hardware test though which is the problem. Edited February 8, 2010 by The-Ice-Man Link to comment Share on other sites More sharing options...
Gomess Posted February 8, 2010 Author Share Posted February 8, 2010 Cheers Mr. Drake, you've helped a bunch already! I tried to get into the dipswitches, but again it gives me the same grid. Seems you have to actually run a rom before you can alter its dispswitches, and obviously I can't run it... ...Should I get a different emulator? Link to comment Share on other sites More sharing options...
The-Ice-Man Posted February 8, 2010 Share Posted February 8, 2010 Not so fast. When you get the grid, you are running the rom. When you get the sound test menu, the sounds you can play are from the game. So you know that the rom is running, and working fine. It's just that you're for some reason stuck in the Hardware test. Once you've launched a game in NeoRage, is there a soft reset option? If so, use it, and see if it takes you back into the hardware test. You'll know you've done a soft reset if you see the green screen followed by the NeoGeo logo. Link to comment Share on other sites More sharing options...
Agozer Posted February 9, 2010 Share Posted February 9, 2010 If NeoRAGEx goes directly to the crosshatch/hardware tests after the initial boot (and doesn't get out of that no matter what), no amount of dipswitch fiddling or soft-resetting will fix that. Yes, the game is "basically" running, but is stuck because the romset is incompatible with NRX for whatever reason. I'm pretty sure that NRX saves the Test Menu options along with game-specific hiscores in its HISCORES directory, in .brmc files. If I'm misundertanding the situation, then I'll apologize and exit from the back promptly. Link to comment Share on other sites More sharing options...
Recommended Posts