fumanchu Posted September 6, 2011 Share Posted September 6, 2011 NEW RELEASE BlueMSXBox BlueMSX Emulator port for XBox v6 First off... "You must have at least ONE rom for our emulator to work. Really... how else are you gonna play you silly wabbit?". ************************************** Notes regarding The Xtras ************************************** Gilou created a new HD skin for 720p users. Check it out. Sometimes starting or getting a game going can be confusing. Here were my observations that might be helpful. Alot of times pressing A will get a game going. If that dont work try Y. Some games prefer a function key be pressed to start. Just bring up the onscreen keyboard and select that function key. The numbers 1-4 are mapped to the right analog pad. 1 = RA up, 2 = RA left, 3 = RA right, 4 = RA down. 0 is mapped to white. F1-F4 are mapped to holding left trigger and the right analog pad. F1 = LT+RA Up, F2 = LT+RA Left, F3 = LT+RA Right, F4 = LT+RA down. F5 is mapped to black. There are some games where you have to hold either CTRL or SHIFT to load them. Just hold down black for these games to work. These games are noted in the compatibility spreadsheet and the games synopsis. thanks go to madmab and xport for the original port. you can get this at the usual sites i upload to,or just say in this thred if you want a link via pm. Link to comment Share on other sites More sharing options...
jamallego Posted September 6, 2011 Share Posted September 6, 2011 good to see a new update..... thanks to madmab for improving it. thanks fu for the upload Link to comment Share on other sites More sharing options...
madmab Posted September 7, 2011 Share Posted September 7, 2011 Hmm seems some of the changelog is missing.. here is the important part. ********************************** Changes To Bluemsx Core ********************************** * Emulator always remembers which Disks, Carts, and Tape are loaded on initial set-up. That way if you do change any during gameplay it wont foobar startup when you go to play the game again. Save states always remember the currently loaded drives anyways. If you want to change the "initial set-up" just reconfigure the game (start by pressing X). * Combined Change Disk, Cart, and Tape menus into one. "Change/Rotate/View Disks, Carts, and Tapes". * Fixed the problem with autoconfig not working for DB entries that contained more than one CRC. * Boot Cart and Disk are no longer asked for in already configured games with a multifile zip. If for some reason you want to change this just reconfigure the game (start by pressing X). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now