MESS 0.145u3 released

[Robert]

Get it here -> http://mess.redump.net/downloads

 

0.145u3 (u2 was not released)

 

System Driver Changes:

----------------------

-n64: Force mtc0 opcodes that initiate to-RSP DMAs to end recompile

sequences to force a code check. Fixes certain microcodes from executing

garbage code after DMA. [Ryan Holtz]

- Miscellaneous machine fixes, gets Conker's Bad Fur Day to boot through

its legal screens with interpreter MIPS.

- Increase the amount of time consumed by PI DMA, makes certain RSP

microcodes that test DMA speed land in the correct window.

- Force the main CPU to yield when the RSP reads its atomic semaphore.

- Force the RSP to yield when PI DMA completes.

- Flush the RSP DRC cache when touching IMEM with SP DMA.

- Increase CPU/RSP interleave from 600Hz to 1200Hz, seems to be just

enough for RSP-side PI DMA tests to land correctly.

- Don't flush the RSP DRC cache on DMA. Fixes Mario 64 and others.

- Fix audio sync issues in Super Mario 64 and probably others, and

also bring PI DMA speed into the realm of reality.

- Change PI DMA speed from 3 cycles/word to 5.08 cycles, as average

PI speed is between 2.53 and 2.55 cycles/byte.

 

-vic20: Added support for loading .crt files. Note: this will only

work if the first 2 bytes of the file contain the loading address,

and only for single part cartridges. Please use the MESS software

list instead of loose files. [Curt Coder]

 

-next: Timer free running mode [O. Galibert]

-c64: Added support for the Final Cartridge and Prophet-64 cartridges. [Curt Coder]

-ti99: Horizon Ramdisk expansion card added [Michael Zapf]

-z88: moved uPD65031 emulation into a device and fixed keyboard input. [sandro Ronco]

 

Software Lists:

----------------

-c64.xml/c128.xml Added Buddy System 64/128 v10 floppies. [Quantum Leaper]

-ti99.xml: Added softlist support to ti99. XML file is still preliminary,

must be filled with more entries. Only two cartridge PCB types

supported (standard/paged) at this time. RPK will continue to be

available. [Michael Zapf]

-apple1.xml: added a few more tapes [Anon01]

-pico.xml: 8 new Euro dumps! [Team Europe]

 

Source Changes:

----------------

- 680x0: Ensure fc/rw and fault address are consistant [O. Galibert]

- i386: Prevent page faults when returning to same privilege and unmapped

pages are above the stack. Windows 95 boots now. [Carl]

- Modernized terminal device and added possibility to change comm parameters [Carl]

- i386: LOCK prefix should depend on IOPL on 386. Windows NT beta boots. [Carl]

- info.c: several fixes and additions to listxml output [Fabio Priuli]

- appended to xml info about devices which can be optionally mounted to slots

- added a description attribute to slotoption to show which devices can be mounted

in each slot

- added to xml info of cpus/inputs/image/slots which are relative to devices (e.g. CPUs

or Dipswitches in the device itself)

- tags of elements directly attached to the root_device do not display anymore the

root colon (slot tags were already behaving in this way); elements attached to optional

devices use tags starting with colon (to be interpreted as a relative tags which gets

appended to the device tag, when such a device is selected in a slot)

- modified when necessary output routines to pass a root_device and a root_tag as

parameters, in order to simplify output of relative devices and avoid duplicated code

- updated DTD according to the new elements and attributes

These changes allow frontends to know in advance how drivers can be configured

through the various slot options (by matching option descriptions with device

descriptions), without the need to run -lx with the various slot combinations. This is

especially of use if a device adds e.g. dipswitches or image devices (like additional

floppy drives or additional slot expansions), but also if one wants to know e.g. how many

sound channels a soundcard would add to a pc driver, or which kind of screen parameters

would be added by a specific choice of video card.